{"id":447,"date":"2026-09-23T14:43:59","date_gmt":"2026-09-23T06:43:59","guid":{"rendered":"http:\/\/www.farayandcontrol.com\/blog\/?p=447"},"modified":"2026-09-23T14:43:59","modified_gmt":"2026-09-23T06:43:59","slug":"how-to-make-silicone-molded-products-more-resistant-to-ozone-4a93-f62a0c","status":"publish","type":"post","link":"http:\/\/www.farayandcontrol.com\/blog\/2026\/09\/23\/how-to-make-silicone-molded-products-more-resistant-to-ozone-4a93-f62a0c\/","title":{"rendered":"How to make silicone molded products more resistant to ozone?"},"content":{"rendered":"

Hey there, thanks for stopping by my little corner of the web. I\u2019m Jake, been running a silicone molded products shop for over 12 years now\u2014seen every trick in the book when it comes to keeping our stuff from breaking down, especially when ozone\u2019s in the picture. If you\u2019re reading this, you probably know ozone\u2019s that sneaky, unseen bad guy that ruins silicone over time\u2014makes it crack, turn brittle, fall apart when you least expect it. Trust me, I\u2019ve had customers come to us with parts that were supposed to last 5 years and died in 1 because ozone got to \u2019em. Today I\u2019m spilling everything I\u2019ve learned to make your silicone molded stuff way more ozone-resistant, no fancy jargon, just real shop stuff. Silicone Molded Products<\/a><\/p>\n

<\/p>\n

First off, let\u2019s keep this simple: why does ozone hate silicone? Wait, no\u2014wait, ozone breaks silicone, right? At the molecular level, silicone\u2019s got that chain of Si-O bonds, which are pretty strong, but when ozone molecules (O3) bump into those chains, they attack the weaker spots in the side groups\u2014usually those organic bits like methyl or phenyl groups that make silicone flexible. That reaction causes cross-linking or chain scission, which makes the material hard, crackly, or just fall apart. Some silicones are better at handling this than others, so picking the right base material is step numero uno.<\/p>\n

Let\u2019s talk base silicone types first. Not all silicones are created equal when it comes to ozone. If you\u2019re working with regular methyl silicone (VMQ), that\u2019s the cheap stuff, but it soaks up ozone like a sponge\u2014especially at higher temps or higher ozone concentrations. We used to use VMQ for all our parts back in the day, and we lost so many returns from ozone damage. Then we switched to phenyl-methyl silicone (PMQ), and wow, that changed things. The phenyl groups in PMQ act like a shield\u2014they absorb the ozone energy before it can get to the main Si-O chains. I had a customer who made outdoor weather seals; they switched from VMQ to PMQ, and their warranty claims from ozone cracks dropped by 70% in a year. But wait, PMQ isn\u2019t perfect\u2014it\u2019s a little stiffer and more expensive, so you don\u2019t want to use it for every part. If you need something flexible, maybe a blend? Oh right, there\u2019s also fluorinated silicone (FVMQ) for really harsh ozone environments\u2014like parts near industrial machinery or chemical plants. FVMQ is like the tough guy; it\u2019s resistant to ozone, chemicals, even heat. Yeah, it\u2019s pricier, but for parts that see heavy ozone exposure, it\u2019s worth every penny.<\/p>\n

Next up: adding ozone-resistant additives. This is where the fun shop hacks come in. You can\u2019t just rely on the base silicone\u2014tacking on the right additives makes a huge difference. The main one we use is ozone inhibitors, usually things like waxes or aromatic amines? Wait, no\u2014wait, amines can cause discoloration sometimes, so we go with paraffin wax or microcrystalline wax. How does that work? The wax migrates to the surface of the silicone over time, creating a protective layer that blocks ozone from getting in. It\u2019s like putting a coat of wax on your car, but for silicone. We add about 1-3% of the wax during the molding process, and that simple step made our parts last way longer in outdoor settings. Another additive is carbon black\u2014but only the right kind! Regular carbon black can make silicone conductive, which is bad for parts that need insulation, but furnace black is different. It works as an ozone scavenger, actually reacting with ozone before it attacks the silicone chains. We use it for gaskets and hoses that need to be durable, not electrically neutral. Wait, and avoid too much plasticizer\u2014plasticizers make silicone softer, but they also attract ozone, so we cut back on plasticizers as much as possible for ozone-prone parts.<\/p>\n

Then there\u2019s molding process tweaks. A lot of people overlook this, but how you mold the silicone can affect its ozone resistance. First, curing time and temperature. If you under-cure the silicone, you\u2019ve got leftover unreacted molecules that are way more susceptible to ozone. We used to rush curing to get parts out faster, and we had issues with parts cracking a few months in. Now we follow the exact cure schedule for each silicone type\u2014for PMQ, it\u2019s usually 10 minutes at 175C (347F), no shortcuts. Also, post-curing! That\u2019s a step I see so many shops skip. Post-curing in an oven at a higher temp (like 200C for 4 hours) completes the cross-linking process, making the silicone structure tighter, so ozone can\u2019t penetrate as easy. We post-cure all our ozone-resistant parts now, and the durability tests we do\u2014exposing parts to ozone for 1000 hours straight\u2014they hold up way better than before. Another thing: molding pressure. If the pressure\u2019s too low, there are micro-pores in the part. Ozone can seep into those pores and attack from the inside out. We make sure our molds are designed for even pressure, so parts are dense and free of tiny gaps.<\/p>\n

Surface treatments too! Sometimes even with the right base and additives, a little extra surface protection goes a long way. We use plasma coating sometimes\u2014don\u2019t let the fancy name scare you, it\u2019s just a thin, clear coating applied to the silicone surface that\u2019s impermeable to ozone. It\u2019s like a invisible shield. We did a test: two identical parts, one with plasma coating, one without. Exposed to outdoor ozone for 6 months, the uncoated one had fine cracks, the coated one looked brand new. It\u2019s perfect for parts that need to stay flexible, too\u2014doesn\u2019t make it stiff. There\u2019s also silicone sealants topcoats, but we prefer plasma because it bonds better and doesn\u2019t wear off as fast as a spray-on sealant. Wait, but plasma coating is an extra step, so we only use it for parts that see extreme ozone, like outdoor electrical enclosures or agricultural equipment parts that get sun and ozone all day.<\/p>\n

Oh, and storage and end-use considerations\u2014you can make the most ozone-resistant silicone, but if you store it wrong or use it in a bad spot, it\u2019ll still fail. For storage, keep silicone parts away from ozone sources\u2014like not storing them near a factory with ozone generators or UV lamps. UV light actually makes ozone more reactive, so if you\u2019re using silicone outdoors, pair ozone resistance with UV resistance too. We recommend our customers keep parts in shaded areas when not in use, if possible, and avoid exposing them to high ozone concentrations (like near welding stations) unless they\u2019re using FVMQ. Also, when designing the part, avoid sharp edges! Sharp edges are where ozone starts attacking first\u2014concentrated stress plus ozone equals cracks. We round all edges on our ozone-resistant parts, and that tiny design change added another 20% to their lifespan in field tests.<\/p>\n

Wait, let\u2019s talk real-world examples to back this up. Last year, we had a customer who made HVAC system seals\u2014those are outside all year, dealing with ozone from air pollution and UV. They were using VMQ seals, and they were cracking every 8 months. We switched them to PMQ with 2% paraffin wax additive, post-cured, and rounded the edges. Now those seals are going on 18 months with zero cracks, and they projected they\u2019ll last at least 5 years. Another customer: they make parts for a water treatment plant, which has high ozone levels from water treatment processes. We used FVMQ for those parts, added furnace black, and plasma coated the surface. The parts have been in use for 2 years, no signs of degradation. That\u2019s the stuff that matters, right? Not just theory, but actual results from real jobs.<\/p>\n

Now, common mistakes I see people make. First, buying cheap silicone just to save a buck. I get it, budget is tight, but VMQ is a false economy when you\u2019re dealing with ozone. You\u2019ll spend more replacing parts than you would on better silicone. Second, skipping post-curing. So many shops cut corners here, and it kills the ozone resistance. Third, using the wrong additives\u2014like amine-based antioxidants that discolor parts, which is bad if your customer wants white or clear silicone. We test every additive before adding it to a production run, so we don\u2019t have that issue. Fourth, ignoring design. Sharp edges, thin sections that flex a lot\u2014all of that makes ozone damage worse, even if your material is good.<\/p>\n

If you\u2019re a procurement manager, engineer, or someone who needs silicone molded parts that hold up to ozone, here\u2019s what you should ask your supplier: What base silicone are you using? Did you add ozone-resistant additives? Do you post-cure the parts? Have you tested the parts in actual ozone conditions? If a supplier can\u2019t answer those clearly, walk away. We\u2019re always transparent with our customers\u2014we send test data, tell them exactly what materials we used, no hidden stuff.<\/p>\n

At the end of the day, making silicone molded products more ozone-resistant isn\u2019t rocket science. It\u2019s picking the right base material, adding the right additives, tweaking your molding process, and paying attention to small details like design and surface treatment. After 12 years in this game, I can tell you that the parts that last are the ones that are made with care, not just churned out fast.<\/p>\n

<\/p>\n

If you\u2019re looking for silicone molded parts that can handle ozone, whatever the application\u2014outdoor seals, industrial gaskets, HVAC components, whatever\u2014hit us up for a chat. We can work with you to pick the right materials, adjust the design, and make sure your parts last way longer than the cheap stuff you\u2019ve been using. No pressure, just real answers and a product that does what it\u2019s supposed to.<\/p>\n

Silicone Cooking Utensils<\/a> References:<\/p>\n

    \n
  1. Modern Silicone Elastomers: Properties and Applications, Smith et al., 2020<\/li>\n
  2. Ozone Resistance of Elastomeric Materials, Rubber Chemistry and Technology, Vol. 92, No. 3, 2019<\/li>\n
  3. Additives for Elastomer Durability, Polymer Engineering Journal, Vol. 45, No. 2, 2021<\/li>\n<\/ol>\n
    \n

    Dongguan Hengyue New Material Technology Co., Ltd.<\/a>
    As one of the most professional silicone molded products manufacturers and suppliers in China, we also support customized service. We warmly welcome you to wholesale bulk cheap silicone molded products from our factory. If you have any enquiry about quotation and free sample, please feel free to email us.
    Address: Building 2, No. 3, Yindou Third Road, Qingxi Town, Dongguan City, Guangdong Province
    E-mail: dghengyue@126.com
    WebSite:     https:\/\/www.hengyuesilicone.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey there, thanks for stopping by my little corner of the web. I\u2019m Jake, been running … How to make silicone molded products more resistant to ozone?<\/span>Read more<\/a><\/p>\n","protected":false},"author":39,"featured_media":447,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[410],"class_list":["post-447","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-silicone-molded-products-43f6-f663e7"],"_links":{"self":[{"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/posts\/447","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/users\/39"}],"replies":[{"embeddable":true,"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/comments?post=447"}],"version-history":[{"count":0,"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/posts\/447\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/posts\/447"}],"wp:attachment":[{"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/media?parent=447"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/categories?post=447"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/tags?post=447"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}