{"id":469,"date":"2026-10-08T10:18:54","date_gmt":"2026-10-08T02:18:54","guid":{"rendered":"http:\/\/www.farayandcontrol.com\/blog\/?p=469"},"modified":"2026-10-08T10:18:54","modified_gmt":"2026-10-08T02:18:54","slug":"what-is-the-dielectric-constant-of-pc-abs-sheet-4675-e43e28","status":"publish","type":"post","link":"http:\/\/www.farayandcontrol.com\/blog\/2026\/10\/08\/what-is-the-dielectric-constant-of-pc-abs-sheet-4675-e43e28\/","title":{"rendered":"What is the dielectric constant of PC\/ABS sheet?"},"content":{"rendered":"

If you\u2019ve ever sourced plastic sheets for electronics, automotive interiors, or industrial components, chances are you\u2019ve encountered PC\/ABS\u2014one of the most versatile polymer blends on the market. As a supplier of custom PC\/ABS sheets, one of the most common questions I get from engineers, product designers, and procurement teams is straightforward: \u201cWhat\u2019s the dielectric constant of your PC\/ABS sheet?\u201d PC\/ABS Sheet<\/a><\/p>\n

<\/p>\n

It\u2019s a fair question, and one that trips up a lot of people new to working with this material. Dielectric constant (often abbreviated as Dk, or \u03b5r) is a fundamental electrical property that describes how well a material can store an electric field, and it\u2019s non-negotiable for applications like printed circuit boards (PCBs), antenna housings, sensor components, and even some consumer electronics casings. Get the Dk wrong, and you risk signal interference, reduced component performance, or even failure of a part mid-production.<\/p>\n

Let\u2019s start by clearing up a myth: there\u2019s no single \u201cone-size-fits-all\u201d dielectric constant for PC\/ABS. That\u2019s because this blend is a miscible mixture of two polymers\u2014polycarbonate (PC) and acrylonitrile butadiene styrene (ABS)\u2014and its properties shift based on the ratio of those two components, the manufacturing process used to make the sheet, and any additives or surface treatments applied during production. As someone who\u2019s been supplying PC\/ABS sheets for over a decade, I\u2019ve seen firsthand how these variables can change Dk values by as much as 15% between two batches that look identical to the naked eye.<\/p>\n

First, let\u2019s break down the base properties of PC and ABS alone, because that\u2019s where the baseline Dk comes from. Neat polycarbonate, the stiffer, heat-resistant half of the blend, has a dielectric constant of roughly 2.9 to 3.0 at 1 kHz and room temperature. That\u2019s pretty low, which makes it ideal for insulating materials. Neat ABS, the more flexible, impact-resistant portion, sits a bit higher: around 3.0 to 3.1 at the same frequency and temperature. So if you mix them, you\u2019d expect the base Dk to fall somewhere in between, right? That\u2019s mostly true, but there\u2019s a catch: the way the blend is compounded and extruded into a sheet matters a lot.<\/p>\n

When we manufacture our PC\/ABS sheets, we tune the PC-to-ABS ratio to match customer needs, but we also control for dielectric performance. For general-purpose PC\/ABS blends, which work for things like non-electrical structural parts, we typically use a 50:50 PC:ABS ratio, and that gives us a consistent dielectric constant of 2.9 to 3.2 at 1 MHz (the frequency range most common for low- and mid-frequency electronics applications, like circuit board substrates or industrial control components). But for higher-frequency use cases\u2014think 5G antennas, RFID tags, or millimeter-wave sensors\u2014we adjust the blend slightly and use specialized manufacturing processes to tighten that Dk range. Our high-frequency grade PC\/ABS sheets have a dielectric constant of 3.0 to 3.1 at 1 GHz, which is stable enough to meet the strict requirements for signal integrity in modern wireless devices.<\/p>\n

Wait, why does frequency matter? Dielectric constant isn\u2019t a static number\u2014it changes depending on how often the electric field is cycling. At lower frequencies, the polymer chains in PC\/ABS have time to align with the electric field, leading to a higher Dk value. At higher frequencies, those chains can\u2019t keep up with the fast-changing field, so Dk drops a bit. That\u2019s a critical detail I always make sure to communicate to customers, because some come to me asking for Dk at 1 kHz, not realizing their application will operate at 1 GHz and thus need a different, more stable measurement.<\/p>\n

Beyond blend ratio and frequency, there are three other factors that can shift the dielectric constant of PC\/ABS sheet, and as a supplier, I don\u2019t hide any of these from my clients. The first is temperature. Most PC\/ABS blends have a glass transition temperature (Tg) around 110 to 120\u00b0C, and when you get close to that Tg, the polymer chains become more mobile, which can cause Dk to rise by 5 to 10% at temperatures above 80\u00b0C. If a customer is working on an application that will see high operating temperatures\u2014like under-the-hood automotive electronics\u2014we adjust the blend with heat stabilizers to keep Dk consistent even at 120\u00b0C or higher.<\/p>\n

The second factor is moisture absorption. Both PC and ABS are hygroscopic to some degree, meaning they absorb small amounts of water from the air, and water has a very high dielectric constant (around 80 at room temperature). If a PC\/ABS sheet absorbs more than 0.2% moisture, its Dk can increase by 0.1 to 0.3, which is enough to disrupt delicate high-frequency signals. That\u2019s why all our PC\/ABS sheets go through a post-manufacturing drying process, and we package them in moisture-barrier bags until they\u2019re shipped to the customer. We also provide a moisture content certificate with every order, so customers know exactly what they\u2019re working with when the sheet arrives.<\/p>\n

The third factor is additives. A lot of customers add flame retardants, UV stabilizers, or color pigments to their PC\/ABS sheets to meet industry regulations or design requirements. But not all additives are neutral when it comes to dielectric constant. For example, some brominated flame retardants can increase Dk by up to 0.5 compared to a non-flame-retarded blend, while mineral fillers like talc can raise it by 0.2 to 0.4. That\u2019s why we test every modified grade we offer: if a customer needs a flame-retarded PC\/ABS sheet for a PCB application, we don\u2019t just take a generic blend off the shelf\u2014we compound it to adjust the Dk, so it stays within the required range of 3.0 to 3.2 even with the flame retardant added.<\/p>\n

I learned the importance of getting these details right the hard way, early in my career. Back in 2014, we had a client who was making antenna housings for a new line of early 4G tablets. They ordered a standard PC\/ABS sheet, and when they tested it, the dielectric constant was 3.5, which was 0.4 higher than their specification. Their production line was already shut down waiting for parts, and they were facing massive delays. That\u2019s when I realized that \u201cgeneric\u201d PC\/ABS is a myth, and every application needs a tailored blend and Dk testing. We ended up re-compounding a high-frequency grade for them, tested it at our in-house lab, got the Dk down to 3.05, and shipped it to them in 48 hours. That experience taught me that being a PC\/ABS sheet supplier isn\u2019t just about selling material\u2014it\u2019s about solving electrical engineering problems, and dielectric constant is one of the biggest parts of that.<\/p>\n

Now, I know what some of you are thinking: \u201cCan\u2019t I just look up a generic Dk for PC\/ABS online?\u201d You can, but those generic numbers are for neat, unmodified pellets, not the extruded sheet that\u2019s actually used in production. Pellets have different molecular orientation and density than sheet, which changes dielectric properties. Online sources often don\u2019t specify frequency, temperature, or blend ratio, so they\u2019re useless for precision applications. That\u2019s why all our customers get a material data sheet (MDS) with every order, which lists the exact dielectric constant at the frequency and temperature relevant to their application, along with all the other properties they need: tensile strength, impact resistance, heat deflection temperature, and moisture content.<\/p>\n

Let\u2019s talk about how we test the dielectric constant of our sheets, because transparency is something I pride myself on. We use two standard methods: the resonant cavity method for high-frequency (1 GHz to 10 GHz) applications, and the parallel plate method for lower-frequency (1 kHz to 1 MHz) use cases. Both methods are standardized by the Institute of Electrical and Electronics Engineers (IEEE) and the International Electrotechnical Commission (IEC), so our measurements are consistent with industry standards. We test three random samples from every batch, and the Dk values never deviate more than \u00b10.05 from the stated range\u2014something we\u2019ve achieved by investing in our compounding and extrusion equipment, so every sheet we make is uniform, not just close.<\/p>\n

So, to circle back to the original question: what is the dielectric constant of PC\/ABS sheet? The short answer is: it depends on what you need it for. If you\u2019re making a structural part for a low-frequency industrial control, our general-purpose PC\/ABS sheet has a Dk of 2.9 to 3.2 at 1 MHz, room temperature. If you\u2019re making a 5G antenna housing or a high-frequency sensor component, our specialized high-grade PC\/ABS sheet has a Dk of 3.0 to 3.1 at 1 GHz, with stability across temperature variations. If you need a flame-retarded or UV-stabilized grade for automotive or consumer electronics, we can adjust the blend to get the Dk you need, without sacrificing other properties.<\/p>\n

<\/p>\n

At the end of the day, dielectric constant is just one of many properties that matter for PC\/ABS sheet, but it\u2019s often the make-or-break one for electrical and electronic applications. If you\u2019re working on a project and you\u2019re not sure what Dk range you need, or you\u2019ve had issues with inconsistent performance from a previous supplier, don\u2019t guess. Reach out to us\u2014we don\u2019t just sell sheets; we work with engineers and designers to tailor our PC\/ABS blends to meet their specific dielectric requirements, test every batch to ensure consistency, and provide all the data you need to keep your projects on track. Whether you need a small prototype order or a large production run, we\u2019ve got the expertise and the materials to get the job done right.<\/p>\n

Extruding Cheap ABS Sheet<\/a> References:<\/p>\n

    \n
  1. CRC Handbook of Polymer Dielectric Constants, 2nd Edition, CRC Press, 2021.<\/li>\n
  2. IEC 60250:2019, Electrical insulation materials – Determination of dielectric constant and loss factor at power frequencies.<\/li>\n
  3. ASTM D150-18, Standard Test Method for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials.<\/li>\n
  4. \u201cDielectric Properties of Polycarbonate\/Acrylonitrile-Butadiene-Styrene Blends for High-Frequency Applications\u201d, Journal of Applied Polymer Science, Vol. 138, Issue 15, 2021.<\/li>\n<\/ol>\n
    \n

    Yangzhou Chengsen Plastics Co., Ltd.<\/a>
    Yangzhou Chengsen Plastics Co., Ltd. is one of the leading pc\/abs sheet manufacturers and suppliers in China, supporting good wholesale and customized services. Welcome to buy discount pc\/abs sheet in stock here and check price with our factory.
    Address: West Of Fenghuang Island Road,Tai’an Town,Yangzhou,Jiangsu,China
    E-mail: info@absgoods.com
    WebSite:     https:\/\/www.absgoods.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    If you\u2019ve ever sourced plastic sheets for electronics, automotive interiors, or industrial components, chances are you\u2019ve … What is the dielectric constant of PC\/ABS sheet?<\/span>Read more<\/a><\/p>\n","protected":false},"author":115,"featured_media":469,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[432],"class_list":["post-469","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-pc-abs-sheet-493d-e46ad0"],"_links":{"self":[{"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/posts\/469","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/users\/115"}],"replies":[{"embeddable":true,"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/comments?post=469"}],"version-history":[{"count":0,"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/posts\/469\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/posts\/469"}],"wp:attachment":[{"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/media?parent=469"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/categories?post=469"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/tags?post=469"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}