{"id":839,"date":"2026-11-21T00:32:52","date_gmt":"2026-11-20T16:32:52","guid":{"rendered":"http:\/\/www.farayandcontrol.com\/blog\/?p=839"},"modified":"2026-11-21T00:32:52","modified_gmt":"2026-11-20T16:32:52","slug":"do-nbr-coated-shims-need-special-handling-4100-4715c9","status":"publish","type":"post","link":"http:\/\/www.farayandcontrol.com\/blog\/2026\/11\/21\/do-nbr-coated-shims-need-special-handling-4100-4715c9\/","title":{"rendered":"Do NBR coated shims need special handling?"},"content":{"rendered":"<p>Let me start this post like I would any conversation with a client walking into our warehouse, coffee in hand, asking the same question they\u2019ve probably Googled a dozen times before: \u201cDo NBR coated shims need special handling?\u201d It\u2019s not a silly question\u2014when you\u2019re sourcing precision components that keep pumps sealed, valves calibrated, and industrial systems running without leaks, small missteps don\u2019t just delay production. They cost downtime, rework, and sometimes hundreds of dollars in lost output. As someone who\u2019s run this NBR coated shim operation for 12 years, I\u2019ve seen every mistake from a warehouse associate stacking shims on a metal shelf to a machinist using a dirty rag to wipe off a part before installation, all because someone assumed \u201crubber-coated metal is just another shim.\u201d Let\u2019s break this down the way I explain it to our new team and our most loyal customers, no jargon, just real-world lessons we\u2019ve learned the hard way. <a href=\"https:\/\/www.jd-fineblanking.com\/anti-noise-shim\/nbr-coated-shim\/\">NBR Coated Shim<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.jd-fineblanking.com\/uploads\/202031140\/small\/electronic-wear-sensor07505801110.jpg\"><\/p>\n<p>First, let\u2019s get the basics straight for anyone who might be reading this and wondering why NBR even matters for shims. NBR stands for Nitrile Butadiene Rubber, right? It\u2019s that synthetic rubber we picked for our coated shims because it\u2019s resistant to oil, fuels, hydraulic fluids, and a whole host of chemicals that eat through neoprene or natural rubber. For shims\u2014thin, flat washers used to adjust gaps between mating parts in everything from industrial pumps to automotive assembly lines\u2014the rubber coating isn\u2019t just a cosmetic add-on. It\u2019s the sealing layer that stops fluid from seeping out, acts as a vibration damper to reduce wear on adjacent metal parts, and provides a non-slip surface so the shim doesn\u2019t shift mid-operation. But here\u2019s the thing about that NBR coating: it\u2019s porous when it\u2019s cured, and it bonds to the steel core with a thin, adhesive layer that\u2019s nowhere near as tough as the steel itself. That\u2019s why handling these shims isn\u2019t the same as handling uncoated steel shims, which you can drag across a concrete floor, stack to the ceiling, and forget about until you need them.<\/p>\n<p>Let\u2019s start with the most common mistake we see customers make, especially when they first switch to NBR coated shims: storage. A few months back, we had a customer in the chemical processing industry call us panicking because their entire batch of shims had gone \u201ctacky\u201d within three weeks of delivery. When they told us how they stored them\u2014stacked on a wooden pallet in their outdoor warehouse, right next to a drum of hydraulic fluid\u2014we knew exactly what had happened. NBR is sensitive to two things: extreme temperatures and direct exposure to hydrocarbons, even in small amounts. Outdoor storage might seem convenient, but if it\u2019s 95 degrees Fahrenheit in the summer, the rubber coating starts to soften, and any slight contact with fluid vapors can leave it sticky. We recommend storing NBR coated shims in a cool, dry area\u2014between 50 and 80 degrees Fahrenheit, if you can help it\u2014away from direct sunlight, which breaks down the rubber\u2019s polymer chains over time. Also, never stack them directly on metal or wooden surfaces that might have residual oil, grease, or solvent. We supply our shims in sealed polyethylene bags when they leave our facility, and customers who keep them in those bags until use report almost zero storage issues. The open-air bins some machinists use for uncoated shims? Not a good idea for NBR. Those bins can trap moisture, too, which might cause the adhesive layer to degrade over long-term storage, leading the rubber to peel off the steel core mid-installation.<\/p>\n<p>Next up: handling during machining and installation. This is where I see a lot of quality control (QC) issues crop up. Machinists often treat NBR coated shims just like steel shims, but that\u2019s a recipe for surface damage. For example, we had a customer in the agricultural equipment sector last year who was getting a 12% failure rate on shims used in their tractor hydraulic pumps. When we visited their facility to troubleshoot, we watched their techs pull shims from a bin, slide them onto a bolt hole with their bare hands, and adjust them with a metal pick to get the gap right. The problem? Skin oils, dirt, and small metal shavings from the workbench were getting pressed into the NBR coating, creating tiny abrasions. Those abrasions turned into leaks when the pump was put under pressure, because the fluid could seep through the damaged spots. We started recommending that all our customers provide nitrile gloves for anyone handling the coated shims, and keep a lint-free, non-abrasive cloth nearby to wipe off any surface debris before installation. Also, never use metal tools\u2014like picks, screwdrivers, or pry bars\u2014to adjust the shim. The NBR is soft compared to steel, so a small pick can leave a deep gouge that\u2019s impossible to see with the naked eye but will cause a leak within weeks of operation. Another thing we learned the hard way in our own shipping department: don\u2019t load shims into packaging with loose metal parts or other sharp components. A few years back, a batch going to a manufacturing plant got scratched because we packed them with uncoated steel spacers, and every scratched shim had to be replaced, costing us time and the customer a delay in their line.<\/p>\n<p>Wait, what about machining the shims themselves? Some customers ask if they can cut or drill NBR coated shims on-site, and the answer is yes\u2014but not without special considerations. Uncoated steel shims can be sheared or punched, but NBR coated shims have a flexible rubber layer that can tear if the cutting edge is too dull or the pressure is too high. We recommend using sharp, fine-toothed cutting blades for on-site modifications, and making sure the shim is clamped firmly to prevent it from shifting during cutting. If you need to drill holes for mounting, use a slow drill speed with a lubricant that\u2019s compatible with NBR\u2014wait, no, actually, NBR doesn\u2019t do well with petroleum-based lubricants, right? That\u2019s another mistake. We had a customer try drilling shims with WD-40 as a lubricant, and the chemical broke down the NBR coating around the hole, leading to edge degradation. We suggest using a water-based lubricant if you need to modify the shim, and cleaning the surface thoroughly after machining to remove any debris or lubricant residue. Also, when punching holes, don\u2019t over-punch\u2014this can cause the rubber layer to separate from the steel core around the hole, which is a common issue we see with customers who don\u2019t account for the coating\u2019s flexibility.<\/p>\n<p>Now, let\u2019s talk about compatibility, because this is a big one that\u2019s not always obvious. NBR is resistant to many oils and chemicals, but it\u2019s not universal. If you\u2019re using NBR coated shims in an environment with chemicals like ketones, esters, or strong acids, the coating can swell, shrink, or even dissolve over time. But even if the fluid is compatible with NBR, some installation practices can cause issues. For example, if you\u2019re mating an NBR coated shim with a part that has a sharp edge\u2014like a burr left from machining\u2014that sharp edge can cut through the rubber coating when the parts are bolted together, creating a leak path. That\u2019s why we always advise customers to deburr mating surfaces before installing shims, even if the shim has a tough coating. We once had a customer who swore up and down they were using the right shims for their application, but their bolts were torqued too tight\u2014over 20 foot-pounds for a 1-inch shim. The excess pressure pushed the steel core into the sharp edge of the mating part, cutting through the NBR, and the shim failed. Torque is another factor that\u2019s easy to overlook. The NBR coating adds a layer of give, so you might think you need to torque bolts tighter to get a tight fit, but that\u2019s not the case. We recommend checking with our engineering team for torque specifications based on your shim size and application, because over-torquing is one of the top causes of premature failure for NBR coated shims.<\/p>\n<p>Let\u2019s address a common misconception I hear all the time: \u201cIf the shim is coated, I don\u2019t have to worry about surface preparation before installation.\u201d That\u2019s simply not true. Even a smooth, clean NBR coating can have residual mold release agents from the manufacturing process, or static charge that attracts dust. If you install a shim without cleaning it, those contaminants can get trapped between the shim and the mating part, creating uneven pressure, which can cause the shim to shift or the part to wear prematurely. We tell all our customers that cleaning the shim before installation is a small step that saves a lot of headaches. Use isopropyl alcohol and a lint-free cloth\u2014nothing harsher than that\u2014 and make sure the shim is completely dry before installing it. We actually test all our shims to remove excess mold release during our QC process, but there\u2019s always a small residual amount left, and removing it ensures the best adhesion and performance.<\/p>\n<p>Now, let\u2019s get to the questions we get from new customers who are weighing whether NBR coated shims are worth the extra effort. I always tell them that the special handling isn\u2019t a hassle\u2014it\u2019s just knowing what makes these shims work, and not fighting against their natural properties. Uncoated steel shims are tough, but they don\u2019t seal. Natural rubber shims seal but wear out quickly in oil-rich environments. NBR is the sweet spot for many applications, but it\u2019s softer, more sensitive to chemicals and temperature, and can be damaged by rough handling. The good news is that the handling steps we\u2019re talking about are simple, and once your team gets used to them, they become second nature. We have a customer that makes large agricultural machinery\u2014they switched to our NBR coated shims three years ago, and at first, their operators were complaining about having to wear gloves and handle the shims carefully. Now, their failure rate is down by 18%, and they save over $15,000 a year in rework costs. That\u2019s the difference between small, intentional handling and treating these shims like any other steel part.<\/p>\n<p>I want to make sure this isn\u2019t just a list of do\u2019s and don\u2019ts. Let\u2019s wrap this up with a real example that stuck with me, because it\u2019s not about the shims\u2014it\u2019s about understanding the product. A customer reached out to us last month, saying they\u2019d had a problem with shims failing in a power generation plant. They\u2019d tried three different suppliers, including us, and none of the shims were lasting more than six months in the hydraulic system. When we looked at their specs, we noticed they were using shims with a 70-durometer NBR coating, which is pretty tough for NBR. But their application required 90-durometer NBR, which is stiffer and more resistant to the high pressure in hydraulic systems. They were using the right material for the job, but they were handling it like a softer 50-durometer NBR, over-torquing bolts and using metal tools. Once we adjusted their specs and gave them a quick training on handling, their failure rate dropped to less than 1%, and they\u2019ve been a repeat customer ever since. That\u2019s the thing about NBR coated shims\u2014they\u2019re not a one-size-fits-all product, and their handling depends on the specific durometer, thickness, and application. But the core principles: cool storage, gentle handling, proper cleaning, and matching installation practices to the shim\u2019s properties, apply across the board.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.jd-fineblanking.com\/uploads\/202131140\/small\/drum-brake-lining19314227102.jpg\"><\/p>\n<p>At the end of the day, the last thing any industrial operator wants is a shutdown caused by a small, easily avoidable mistake with a shim. We\u2019ve been making NBR coated shims for years, and we\u2019ve learned that the best way to help our customers succeed is not just to send them a batch of parts, but to share what we\u2019ve learned about handling them correctly. If you\u2019re using NBR coated shims and you\u2019re dealing with leaks, premature wear, or just wondering if you\u2019re handling them the right way, reach out to our team. We don\u2019t just sell shims\u2014we work with operators, maintenance teams, and engineers to make sure every component works as it should, with no surprises. Don\u2019t let a small handling misstep turn a reliable shim into a problem. Take the time to follow these simple steps, and you\u2019ll get the full benefit of NBR\u2019s sealing, vibration-damping properties for years to come.<\/p>\n<hr \/>\n<p><a href=\"https:\/\/www.jd-fineblanking.com\/anti-noise-shim\/adhesive-backed-shim\/\">Adhesive-backed Shim<\/a> References<\/p>\n<ol>\n<li>&quot;NBR Rubber Material Properties and Applications.&quot; Rubber Chemistry and Technology, vol. 92, no. 3, 2019, pp. 457-489.<\/li>\n<li>Industrial Shims: Design, Handling, and Performance Standards. Society of Manufacturing Engineers, 2021.<\/li>\n<li>&quot;Seal Integrity in Hydraulic Systems: The Role of Coated Shims.&quot; Journal of Industrial Maintenance and Repair, vol. 14, no. 2, 2020, pp. 112-124.<\/li>\n<li>&quot;Storage and Handling Guidelines for Elastomer-Coated Components.&quot; Institute of Rubber Industry Standards, 2018.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.jd-fineblanking.com\/\">Hangzhou Jida Auto Fitting Trading Co., Ltd.<\/a><br \/>As one of the most professional nbr coated shim manufacturers and suppliers in China, we offer a wide range of products with superior quality. Please feel free to wholesale custom made nbr coated shim from our factory. Contact us for more cheap products.<br \/>Address: No.588 LouYing Road, LouTa Town, Xiaoshan, HangZhou, Zhejiang China.<br \/>E-mail: Karl.chen@jidaauto.com<br \/>WebSite: <a href=\"https:\/\/www.jd-fineblanking.com\/\">https:\/\/www.jd-fineblanking.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Let me start this post like I would any conversation with a client walking into our &hellip; <a title=\"Do NBR coated shims need special handling?\" class=\"hm-read-more\" href=\"http:\/\/www.farayandcontrol.com\/blog\/2026\/11\/21\/do-nbr-coated-shims-need-special-handling-4100-4715c9\/\"><span class=\"screen-reader-text\">Do NBR coated shims need special handling?<\/span>Read more<\/a><\/p>\n","protected":false},"author":268,"featured_media":839,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[802],"class_list":["post-839","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-nbr-coated-shim-4865-47486d"],"_links":{"self":[{"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/posts\/839","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/users\/268"}],"replies":[{"embeddable":true,"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/comments?post=839"}],"version-history":[{"count":0,"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/posts\/839\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/posts\/839"}],"wp:attachment":[{"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/media?parent=839"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/categories?post=839"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.farayandcontrol.com\/blog\/wp-json\/wp\/v2\/tags?post=839"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}